Here is a quite easy way of creating a great geometric wall shapes which will make your home more ornamental and positive! They can also be used on a cake or plants or on tables and so on. Rendering your home or places around you has never been this much easy, so lets start to do it!
Ingredients that are going to be needed:
- Balsa wood 1/4
- Gold Spray Paint
- Hot Glue Gun
- Hot Glue Sticks
- Miter Cuter Hand Shear
- X-acto Blade
- Glue Dots or Double Sided Tape
Step 1: To begin with, you need to decide the lengths of each geometric shape and then start to cut them at marked points by using either an X-acto blade or the miter hand shear after the measurement.
Step 2: Aligning the pieces to be able to decide on the angle to cut helps you a lot in the process of shear. You can also use the miter hand shear to estimate the proper cuts.
Step 3: The same should be applied on the 3-dimensional pieces which need to be projected from the base. Then cut the pieces again when you get the desired angle. Trimming can also follow the process if it’s required.
Step 4: Apply the hot glue on each end of piece with a dot of hot glue. This operation makes the pieces assembled. Hold them in place until the glue cools.
Step 5: You can use any color of cardstock so it’s all up to you. After choosing the color, apply hot glue on the base of balsa wood structure and compress it to the cardstock.
Step 6: Lastly, cut around the edge of balsa wood carefully by the help of an X-acto blade to cut away from the paper sheet and the process is going to be done!
Congratulations! You just completed a creation process of an incredibly easy DIY Geometric Wall Decor or where else you would like to use. Hoping that you liked this DIY project. Please share with us if you have any comment or any other idea.
See you on next DIY project!